Double Glazing Door Lock Repairs
Are you experiencing issues with your uPVC window or door mechanism broken? Maybe the handles on your uPVC windows or doors aren't aligned properly or are difficult to operate.
It is crucial that the double glazed doors function smoothly, or else you will lose energy and increase the chance of burglary. Owen the Locksmith can fix your door lock at a reasonable cost.
Snapped Key
It can be a hassle when a key gets stuck into a lock. This can also be a security risk, as it may expose you to an intruder if the door is not locked. There are fortunately quick fixes that you can try to resolve the issue and get your door working correctly.
Keep calm. If you panic, you could end up pushing the damaged key piece further into the lock.
Spray WD-40, or any other penetrating lubricant, into the lock. This will help the broken piece to emerge more easily. You can also make use of a screwdriver to break up any pieces stuck that could be hindering the flow. If you happen to have a little bit of the key left visible it, you can make use of a paperclip, or any other metal object that is thin to grab it and pull it out. Both of these methods work, but be careful not to push the damaged piece of the key further into the keyway.
Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades also work well for this. If you don't have any of them available, you can use needle-nose pliers that bend to create a hook. Finally, you can use a pair tweezers to grab and remove the last piece of broken keys.
If you are unable to remove the broken key piece then you can use a lock deicer. This is usually available at all hardware stores. It is used to freeze any water or ice that could be in the lock.
If none of these methods appear to be working, it might be time to call in locksmith. The experts at Fitlocks can quickly resolve issues with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also modify your double glazing door mechanisms to make them more user-friendly. You can book an appointment online for a double-glazing repair or contact us to discuss your needs.
Broken Cylinder
A broken cylinder is an extremely risky security issue. It's a good thing that it's a simple repair for an expert locksmith to complete. To repair the cylinder, locksmiths must tap it. They can do this using the hammer or any other tools, but the most effective way is to make use of a long match or a piece of wire. Then, position the end of the match or wire close to the keyway. The locksmith can then strike the lock in order to crack it. This is much safer than using a hammer, which could harm the lock.
The most frequent cause of cracks in the head of a cylinder is due to overheating. This can happen when the block and cylinder head are made of different metals like cast-iron and aluminum. Different metals will be heated and cool at different rates. This can cause localised hotspots to expand quicker than the rest.
Corrosion is a different cause of cracks in the cylinder. If the head and block of a cylinder are not maintained properly they could corrosion or rust and cause them to expand faster than expected. As time passes, this may also lead to cracks.
If your uPVC window or door lock is rigid and requires a lot more pressure to turn it could be due to a variety reasons. A malfunctioning locking mechanism, misalignment or an old handle are the most common causes of this issue.
Fortunately it's a simple and cost-effective fix for the majority of homeowners with double glazing. A professional locksmith is able to solve the issue within one hour of arriving at your home. They can fix the locking mechanisms, or change the window handles and change the gearboxes based on your particular requirements. A skilled locksmith will always be able to provide you with a recommendation of the most cost-effective solution for your home. They can even suggest upgrades to high-security 3 Star euro cylinders TS007 that provide an extra layer of security against burglars. It's a small price to pay for the peace-of-mind that comes from knowing that your uPVC door is secure.
double glazing repairs 's not surprising that window handle locks may break. They have complex mechanisms that become less effective over time. It can be difficult to determine the reason behind the problem and fix it correctly.
Repairing your damaged handle, whether it's the internal latch or locking mechanism will increase the security of your uPVC door and prevent draughts. It could be costly to replace or repair your handle incorrectly and it could also harm the frame and the lock of your door.
With the window in the open position then loosen the screw holding the handle by using a screwdriver. The screw should be on the inside of the backplate, which is usually concealed by an eye-catching cap to conceal it to enhance the appearance. It is important to not lose any internal components of the handle, such as the levers and plates on either side. Keep them in the same arrangement so that it is simpler to replace them in the event of a need.
Then, using a second screwdriver, loosen the screw that connects the handle with the spindle in the back. Once the screw is loose, pull the handle out and remove the broken spindle. Replace it with a brand new one, making sure it's the same size as the old one (you can typically find these online or in hardware stores) and then securely screw it in place. Be careful not to tighten too much as this could cause damage to the handle or the window frame.
Check that the new handle is correctly installed, then close and test the handle. It should work smoothly, and you will be able to open your window once again.
Be sure to double-check that your uPVC window is shut properly when you're working with the handle. If they're not closing correctly, you could encounter draughts or damp in your home. It could also affect the energy efficiency of your home. A local window company, such as Core Sash Windows, will be able to adjust the hinges on your window frames so they can shut properly.
Broken Spindle
It is more common for the spindle to break rather than the handle. This is particularly common in uPVC tilt and turn windows. These windows require a handle that acts as a locking mechanism within the frame of the window. The handle is connected to a central rod which triggers a set of cams that look like mushrooms, they secure the frame of the window. If the dead latch mechanism is not able to open when the handle is turned it is likely that the spindle is broken, this can be a frustrating problem.
There are ways to fix this problem. A reputable locksmith can swiftly and efficiently fix this problem. A reputable locksmith will be able disassemble the handle of the window by using a tool that removes the wheel portion that houses the spindle. This is done without damage to the handle or window frame.
Once the wheel is removed, the technician can inspect the spindle to determine what has caused it to break. This involves disassembling the spindle and examining every component, observing any wear or damage. The process is performed in a clean room by skilled technicians.
Then, clean the damaged spindle. This will help remove any debris or dirt that may be obstructing it from operating normally. Following this the spindle is cleaned, it could be repaired or replaced. If the technician is replacing the spindle, he can use a dowel that is the same size to the original. The technician will then make holes in the same way into both pieces. This will ensure that the spindle is perfectly matched with the handle.
If the spindle that is damaged is beyond repair, it may be necessary to replace it entirely. Home centres sell generic replacements but if the style of your window is rare then it is necessary to contact a wood worker or cabinet maker who can replicate the exact model for you. Once the new spindle is in place it can be fitted to the handle by lining up the screw holes on the handle with the frame's existing screws. Once the handle is set, you are able to operate your uPVC windows.